EL-CE7RVF Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-CE7RVF. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1773111621	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	3 TXcount/10m
1773111021	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	2 TXcount/10m
1773110421	0 RX Erlang	0.02 TX Erlang	1 RXcount/10m	3 TXcount/10m
1773109821	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	1 TXcount/10m
1773109221	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	2 TXcount/10m
1773108621	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1773108021	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	3 TXcount/10m
1773107421	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	2 TXcount/10m
1773106821	0 RX Erlang	0.07 TX Erlang	0 RXcount/10m	6 TXcount/10m
1773106221	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	1 TXcount/10m
1773105621	0 RX Erlang	0.48 TX Erlang	0 RXcount/10m	21 TXcount/10m
1773105021	0 RX Erlang	0.91 TX Erlang	0 RXcount/10m	15 TXcount/10m
1773104421	0 RX Erlang	0.9 TX Erlang	0 RXcount/10m	12 TXcount/10m
1773103821	0 RX Erlang	0.81 TX Erlang	0 RXcount/10m	19 TXcount/10m
1773103221	0 RX Erlang	0.8 TX Erlang	0 RXcount/10m	33 TXcount/10m
1773102621	0 RX Erlang	0.76 TX Erlang	0 RXcount/10m	38 TXcount/10m
1773102021	0 RX Erlang	0.81 TX Erlang	0 RXcount/10m	30 TXcount/10m
1773101421	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	4 TXcount/10m
1773100821	0 RX Erlang	0.23 TX Erlang	0 RXcount/10m	17 TXcount/10m
1773100221	0 RX Erlang	0.32 TX Erlang	0 RXcount/10m	26 TXcount/10m
1773099621	0 RX Erlang	0.35 TX Erlang	3 RXcount/10m	32 TXcount/10m
1773099021	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	4 TXcount/10m
1773098421	0 RX Erlang	0.08 TX Erlang	0 RXcount/10m	13 TXcount/10m
1773097821	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	4 TXcount/10m
1773097221	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	1 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)