EL-CE3PBR Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-CE3PBR. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1788626401	0 RX Erlang	0.11 TX Erlang	0 RXcount/10m	14 TXcount/10m
1788625801	0 RX Erlang	0.14 TX Erlang	0 RXcount/10m	14 TXcount/10m
1788625201	0 RX Erlang	0.05 TX Erlang	1 RXcount/10m	7 TXcount/10m
1788624601	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	5 TXcount/10m
1788624001	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1788623401	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	3 TXcount/10m
1788622801	0 RX Erlang	0.08 TX Erlang	0 RXcount/10m	7 TXcount/10m
1788622201	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1788621601	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	4 TXcount/10m
1788621001	0 RX Erlang	0.08 TX Erlang	0 RXcount/10m	6 TXcount/10m
1788620401	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	6 TXcount/10m
1788619801	0 RX Erlang	0.1 TX Erlang	0 RXcount/10m	17 TXcount/10m
1788619201	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	7 TXcount/10m
1788618601	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1788618001	0.12 RX Erlang	0.09 TX Erlang	18 RXcount/10m	23 TXcount/10m
1788617401	0 RX Erlang	0.07 TX Erlang	0 RXcount/10m	8 TXcount/10m
1788616801	0.13 RX Erlang	0.06 TX Erlang	18 RXcount/10m	23 TXcount/10m
1788616201	0 RX Erlang	0.04 TX Erlang	2 RXcount/10m	4 TXcount/10m
1788615601	0.31 RX Erlang	0.41 TX Erlang	10 RXcount/10m	22 TXcount/10m
1788615001	0.43 RX Erlang	0.42 TX Erlang	13 RXcount/10m	24 TXcount/10m
1788614401	0.18 RX Erlang	0.36 TX Erlang	5 RXcount/10m	22 TXcount/10m
1788613801	0.09 RX Erlang	0.16 TX Erlang	6 RXcount/10m	14 TXcount/10m
1788613201	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1788612601	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	2 TXcount/10m
1788612001	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	3 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)