SQ5WPR-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ5WPR-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1757814127	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	6 count/10m
1757812927	0.01 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	6 count/10m
1757806927	0.01 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	5 count/10m
1757805747	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	7 count/10m
1757804527	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	0 count/10m	7 count/10m
1757803327	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	7 count/10m
1757802127	0.01 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	6 count/10m
1757800927	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	6 count/10m
1757799727	0.01 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	6 count/10m
1757798527	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	6 count/10m
1757797327	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	7 count/10m
1757796127	0.02 Rx Erlang	0.01 Tx Erlang	24 count/10m	0 count/10m	10 count/10m
1757794927	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	7 count/10m
1757793727	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	6 count/10m
1757792527	0.01 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	6 count/10m
1757791327	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	6 count/10m
1757790127	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	0 count/10m	7 count/10m
1757788927	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	5 count/10m
1757787729	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	6 count/10m
1757786527	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	6 count/10m
1757785327	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	6 count/10m
1757784127	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	6 count/10m
1757782927	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	5 count/10m
1757781727	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	5 count/10m
1757780527	0.01 Rx Erlang	0.01 Tx Erlang	14 count/10m	1 count/10m	6 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)