W8VFR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W8VFR-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1757517910	0.1 Rx Erlang	0.02 Tx Erlang	97 count/10m	3 count/10m	15 count/10m
1757516710	0.11 Rx Erlang	0.01 Tx Erlang	105 count/10m	3 count/10m	14 count/10m
1757515518	0.14 Rx Erlang	0.02 Tx Erlang	121 count/10m	7 count/10m	17 count/10m
1757514310	0.15 Rx Erlang	0.02 Tx Erlang	150 count/10m	12 count/10m	22 count/10m
1757513110	0.15 Rx Erlang	0.02 Tx Erlang	147 count/10m	8 count/10m	24 count/10m
1757511910	0.12 Rx Erlang	0.02 Tx Erlang	129 count/10m	5 count/10m	22 count/10m
1757510710	0.12 Rx Erlang	0.01 Tx Erlang	111 count/10m	8 count/10m	13 count/10m
1757509510	0.11 Rx Erlang	0.02 Tx Erlang	106 count/10m	6 count/10m	14 count/10m
1757508310	0.14 Rx Erlang	0.02 Tx Erlang	123 count/10m	11 count/10m	17 count/10m
1757507110	0.13 Rx Erlang	0.02 Tx Erlang	116 count/10m	20 count/10m	19 count/10m
1757505910	0.13 Rx Erlang	0.02 Tx Erlang	120 count/10m	4 count/10m	22 count/10m
1757504710	0.16 Rx Erlang	0.03 Tx Erlang	151 count/10m	3 count/10m	27 count/10m
1757503510	0.16 Rx Erlang	0.03 Tx Erlang	140 count/10m	4 count/10m	24 count/10m
1757502310	0.12 Rx Erlang	0.02 Tx Erlang	129 count/10m	2 count/10m	23 count/10m
1757501110	0.13 Rx Erlang	0.02 Tx Erlang	123 count/10m	3 count/10m	23 count/10m
1757499910	0.13 Rx Erlang	0.02 Tx Erlang	123 count/10m	7 count/10m	22 count/10m
1757498710	0.14 Rx Erlang	0.03 Tx Erlang	136 count/10m	7 count/10m	25 count/10m
1757497510	0.12 Rx Erlang	0.02 Tx Erlang	121 count/10m	7 count/10m	17 count/10m
1757496310	0.13 Rx Erlang	0.02 Tx Erlang	120 count/10m	6 count/10m	18 count/10m
1757495110	0.14 Rx Erlang	0.02 Tx Erlang	134 count/10m	4 count/10m	21 count/10m
1757493910	0.15 Rx Erlang	0.02 Tx Erlang	141 count/10m	5 count/10m	22 count/10m
1757492710	0.15 Rx Erlang	0.02 Tx Erlang	143 count/10m	5 count/10m	21 count/10m
1757491510	0.11 Rx Erlang	0.02 Tx Erlang	116 count/10m	2 count/10m	16 count/10m
1757490310	0.12 Rx Erlang	0.02 Tx Erlang	118 count/10m	1 count/10m	19 count/10m
1757489110	0.09 Rx Erlang	0.02 Tx Erlang	98 count/10m	0 count/10m	17 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)