DL1PPA-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL1PPA-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1761624686	1000.7 hPa	24.6 C deg	1019.4 hPa	0 C deg
1761622868	1000.7 hPa	24.6 C deg	1019.4 hPa	0 C deg
1761621053	1000.8 hPa	24.5 C deg	1019.5 hPa	0 C deg
1761619238	1001 hPa	24.7 C deg	1019.8 hPa	0 C deg
1761617423	1001.3 hPa	24.8 C deg	1020 hPa	0 C deg
1761615605	1001.3 hPa	24.9 C deg	1020 hPa	0 C deg
1761613790	1001.2 hPa	24.8 C deg	1019.9 hPa	0 C deg
1761611975	1000.9 hPa	24.7 C deg	1019.7 hPa	0 C deg
1761610160	1000.8 hPa	24.9 C deg	1019.6 hPa	0 C deg
1761608345	1000.9 hPa	25 C deg	1019.6 hPa	0 C deg
1761606530	1000.8 hPa	25.1 C deg	1019.5 hPa	0 C deg
1761604715	1000.6 hPa	25.3 C deg	1019.2 hPa	0 C deg
1761602900	1000.4 hPa	25.5 C deg	1019.1 hPa	0 C deg
1761601092	1000.2 hPa	25.8 C deg	1018.8 hPa	0 C deg
1761599266	999.8 hPa	26 C deg	1018.4 hPa	0 C deg
1761597451	999.5 hPa	26 C deg	1018.2 hPa	0 C deg
1761595636	998.9 hPa	26.2 C deg	1017.5 hPa	0 C deg
1761593821	998.4 hPa	25.9 C deg	1017 hPa	0 C deg
1761592003	997.9 hPa	26 C deg	1016.5 hPa	0 C deg
1761590188	997.3 hPa	25.8 C deg	1015.9 hPa	0 C deg
1761588373	996.8 hPa	25.9 C deg	1015.4 hPa	0 C deg
1761586558	996.2 hPa	25.7 C deg	1014.8 hPa	0 C deg
1761584740	995.3 hPa	26 C deg	1013.9 hPa	0 C deg
1761582925	994.5 hPa	26.1 C deg	1013 hPa	0 C deg
1761581110	993.7 hPa	25.7 C deg	1012.3 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)