YM4KIS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM4KIS. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1788673386	14.28 Volt	220 Pkt	50 Pkt	86 Pcnt	85 Pcnt
1788672725	14.36 Volt	220 Pkt	50 Pkt	87 Pcnt	85 Pcnt
1788672065	14.36 Volt	220 Pkt	50 Pkt	88 Pcnt	85 Pcnt
1788671405	14.36 Volt	220 Pkt	50 Pkt	90 Pcnt	85 Pcnt
1788670745	14.36 Volt	220 Pkt	50 Pkt	90 Pcnt	85 Pcnt
1788670084	13.91 Volt	220 Pkt	50 Pkt	92 Pcnt	85 Pcnt
1788669424	13.62 Volt	200 Pkt	50 Pkt	92 Pcnt	85 Pcnt
1788668763	13.47 Volt	190 Pkt	50 Pkt	90 Pcnt	85 Pcnt
1788668102	13.39 Volt	190 Pkt	50 Pkt	91 Pcnt	85 Pcnt
1788666781	12.88 Volt	180 Pkt	40 Pkt	90 Pcnt	85 Pcnt
1788666120	12.58 Volt	160 Pkt	40 Pkt	90 Pcnt	85 Pcnt
1788665461	12.36 Volt	160 Pkt	40 Pkt	87 Pcnt	85 Pcnt
1788664806	12.43 Volt	160 Pkt	40 Pkt	87 Pcnt	85 Pcnt
1788664139	12.51 Volt	150 Pkt	40 Pkt	85 Pcnt	85 Pcnt
1788663478	12.51 Volt	150 Pkt	40 Pkt	83 Pcnt	85 Pcnt
1788662817	12.51 Volt	160 Pkt	40 Pkt	82 Pcnt	85 Pcnt
1788662157	12.51 Volt	160 Pkt	40 Pkt	83 Pcnt	85 Pcnt
1788661496	12.51 Volt	160 Pkt	40 Pkt	85 Pcnt	85 Pcnt
1788660836	12.51 Volt	160 Pkt	40 Pkt	84 Pcnt	85 Pcnt
1788660209	-	-	-	-	-
1788660176	12.51 Volt	170 Pkt	40 Pkt	83 Pcnt	85 Pcnt
1788659514	12.51 Volt	170 Pkt	40 Pkt	83 Pcnt	85 Pcnt
1788658854	12.51 Volt	160 Pkt	40 Pkt	84 Pcnt	85 Pcnt
1788658193	12.51 Volt	170 Pkt	40 Pkt	85 Pcnt	85 Pcnt
1788657532	12.51 Volt	160 Pkt	40 Pkt	84 Pcnt	85 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)