K2CSN-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K2CSN-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1762342367	11 Pkts	10 Pkts	1 Pkts	22 C
1762338768	0 Pkts	0 Pkts	0 Pkts	21 C
1762335168	14 Pkts	7 Pkts	3 Pkts	22 C
1762331266	0 Pkts	0 Pkts	0 Pkts	22 C
1762327665	2 Pkts	1 Pkts	0 Pkts	22 C
1762324063	8 Pkts	8 Pkts	4 Pkts	22 C
1762320463	24 Pkts	16 Pkts	4 Pkts	22 C
1762316863	49 Pkts	34 Pkts	7 Pkts	23 C
1762313263	17 Pkts	12 Pkts	1 Pkts	23 C
1762307168	22 Pkts	20 Pkts	6 Pkts	23 C
1762303568	119 Pkts	111 Pkts	36 Pkts	23 C
1761918269	91 Pkts	91 Pkts	26 Pkts	21 C
1761914671	109 Pkts	109 Pkts	37 Pkts	21 C
1761911069	87 Pkts	87 Pkts	30 Pkts	21 C
1761907469	66 Pkts	66 Pkts	20 Pkts	21 C
1761903869	82 Pkts	82 Pkts	27 Pkts	21 C
1761900269	73 Pkts	73 Pkts	24 Pkts	21 C
1761896669	71 Pkts	71 Pkts	19 Pkts	21 C
1761893069	70 Pkts	70 Pkts	21 Pkts	21 C
1761889469	58 Pkts	58 Pkts	19 Pkts	21 C
1761885869	61 Pkts	61 Pkts	20 Pkts	21 C
1761882269	63 Pkts	63 Pkts	18 Pkts	21 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)