SA4THA-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SA4THA-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1761535421	963.2 hPa	6.9 C deg	987.9 hPa	0 C deg
1761533605	963.2 hPa	6.8 C deg	987.9 hPa	0 C deg
1761531790	963.3 hPa	6.8 C deg	988 hPa	0 C deg
1761529975	963.5 hPa	6.6 C deg	988.2 hPa	0 C deg
1761528160	963.7 hPa	6.6 C deg	988.4 hPa	0 C deg
1761526345	963.7 hPa	6.7 C deg	988.5 hPa	0 C deg
1761522715	964 hPa	6.2 C deg	988.8 hPa	0 C deg
1761520900	964.1 hPa	6.1 C deg	988.9 hPa	0 C deg
1761519085	964.1 hPa	5.8 C deg	988.9 hPa	0 C deg
1761517270	964.2 hPa	5.6 C deg	989.1 hPa	0 C deg
1761515455	964.4 hPa	6.1 C deg	989.2 hPa	0 C deg
1761513640	964.6 hPa	6 C deg	989.5 hPa	0 C deg
1761511824	964.8 hPa	5.3 C deg	989.7 hPa	0 C deg
1761510011	964.8 hPa	5.7 C deg	989.7 hPa	0 C deg
1761504565	965.1 hPa	7.2 C deg	989.9 hPa	0 C deg
1761502750	965.1 hPa	8.5 C deg	989.8 hPa	0 C deg
1761497312	965.5 hPa	8.9 C deg	990.1 hPa	0 C deg
1761488229	965.9 hPa	11.3 C deg	990.3 hPa	0 C deg
1761486417	966 hPa	11.7 C deg	990.4 hPa	0 C deg
1761484599	966.1 hPa	11.4 C deg	990.5 hPa	0 C deg
1761482784	966.1 hPa	11.6 C deg	990.5 hPa	0 C deg
1761479154	966.4 hPa	11.7 C deg	990.8 hPa	0 C deg
1761470080	966.9 hPa	10.4 C deg	991.4 hPa	0 C deg
1761468263	966.9 hPa	10.3 C deg	991.4 hPa	0 C deg
1761464635	966.9 hPa	9.5 C deg	991.5 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)