K4CDN-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K4CDN-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761628120	0.13 Rx Erlang	0.04 Tx Erlang	104 count/10m	36 count/10m	27 count/10m
1761626920	0.12 Rx Erlang	0.04 Tx Erlang	95 count/10m	33 count/10m	25 count/10m
1761625720	0.11 Rx Erlang	0.03 Tx Erlang	94 count/10m	29 count/10m	27 count/10m
1761624520	0.1 Rx Erlang	0.04 Tx Erlang	79 count/10m	22 count/10m	26 count/10m
1761623320	0.14 Rx Erlang	0.04 Tx Erlang	112 count/10m	33 count/10m	27 count/10m
1761622120	0.14 Rx Erlang	0.05 Tx Erlang	106 count/10m	40 count/10m	32 count/10m
1761620920	0.14 Rx Erlang	0.05 Tx Erlang	104 count/10m	45 count/10m	34 count/10m
1761619720	0.13 Rx Erlang	0.05 Tx Erlang	102 count/10m	39 count/10m	34 count/10m
1761618520	0.13 Rx Erlang	0.04 Tx Erlang	103 count/10m	39 count/10m	32 count/10m
1761617320	0.1 Rx Erlang	0.04 Tx Erlang	87 count/10m	23 count/10m	31 count/10m
1761616120	0.12 Rx Erlang	0.03 Tx Erlang	95 count/10m	21 count/10m	24 count/10m
1761614920	0.12 Rx Erlang	0.04 Tx Erlang	98 count/10m	32 count/10m	29 count/10m
1761613720	0.13 Rx Erlang	0.04 Tx Erlang	108 count/10m	32 count/10m	33 count/10m
1761612520	0.11 Rx Erlang	0.03 Tx Erlang	92 count/10m	23 count/10m	22 count/10m
1761611320	0.13 Rx Erlang	0.04 Tx Erlang	104 count/10m	36 count/10m	32 count/10m
1761610120	0.11 Rx Erlang	0.04 Tx Erlang	89 count/10m	25 count/10m	29 count/10m
1761608920	0.12 Rx Erlang	0.04 Tx Erlang	102 count/10m	26 count/10m	28 count/10m
1761607720	0.14 Rx Erlang	0.04 Tx Erlang	101 count/10m	31 count/10m	27 count/10m
1761606520	0.13 Rx Erlang	0.04 Tx Erlang	110 count/10m	31 count/10m	32 count/10m
1761605320	0.13 Rx Erlang	0.05 Tx Erlang	103 count/10m	36 count/10m	33 count/10m
1761604120	0.11 Rx Erlang	0.04 Tx Erlang	93 count/10m	26 count/10m	29 count/10m
1761602920	0.12 Rx Erlang	0.04 Tx Erlang	106 count/10m	25 count/10m	33 count/10m
1761601720	0.15 Rx Erlang	0.05 Tx Erlang	127 count/10m	20 count/10m	34 count/10m
1761600520	0.15 Rx Erlang	0.05 Tx Erlang	121 count/10m	29 count/10m	33 count/10m
1761599320	0.12 Rx Erlang	0.04 Tx Erlang	108 count/10m	29 count/10m	31 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)