SP6PCL-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP6PCL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1787583821	682 Count	0 Count	0 Count	0 VDC	0 VDC
1787582020	681 Count	0 Count	0 Count	0 VDC	0 VDC
1787580219	680 Count	0 Count	0 Count	0 VDC	0 VDC
1787578418	679 Count	0 Count	0 Count	0 VDC	0 VDC
1787576625	678 Count	0 Count	0 Count	0 VDC	0 VDC
1787574824	677 Count	0 Count	0 Count	0 VDC	0 VDC
1787573023	676 Count	0 Count	0 Count	0 VDC	0 VDC
1787571223	675 Count	0 Count	0 Count	0 VDC	0 VDC
1787569422	674 Count	0 Count	0 Count	0 VDC	0 VDC
1787567621	673 Count	0 Count	0 Count	0 VDC	0 VDC
1787565821	672 Count	0 Count	0 Count	0 VDC	0 VDC
1787564020	671 Count	0 Count	0 Count	0 VDC	0 VDC
1787562219	670 Count	0 Count	0 Count	0 VDC	0 VDC
1787560419	669 Count	0 Count	0 Count	0 VDC	0 VDC
1787558618	668 Count	0 Count	0 Count	0 VDC	0 VDC
1787556817	667 Count	0 Count	0 Count	0 VDC	0 VDC
1787555024	666 Count	0 Count	0 Count	0 VDC	0 VDC
1787553223	665 Count	0 Count	0 Count	0 VDC	0 VDC
1787551423	664 Count	0 Count	0 Count	0 VDC	0 VDC
1787549622	663 Count	0 Count	0 Count	0 VDC	0 VDC
1787547821	662 Count	0 Count	0 Count	0 VDC	0 VDC
1787546021	661 Count	0 Count	0 Count	0 VDC	0 VDC
1787544220	660 Count	0 Count	0 Count	0 VDC	0 VDC
1787542419	659 Count	0 Count	0 Count	0 VDC	0 VDC
1787540619	658 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)