HS4IOO-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4IOO-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	INET2RF*	RxPkts*	TxPkts*	DropRx*
1777029827	0 Pkts	38 Pkts	66 Pkts	0 Pkts
1777029227	0 Pkts	12 Pkts	29 Pkts	0 Pkts
1777028627	0 Pkts	112 Pkts	19 Pkts	0 Pkts
1777028027	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1776683885	0 Pkts	0 Pkts	1 Pkts	0 Pkts
1776607789	0 Pkts	104 Pkts	35 Pkts	0 Pkts
1776606992	0 Pkts	127 Pkts	85 Pkts	0 Pkts
1776606392	0 Pkts	121 Pkts	47 Pkts	0 Pkts
1776605792	0 Pkts	131 Pkts	97 Pkts	0 Pkts
1776605192	0 Pkts	102 Pkts	36 Pkts	0 Pkts
1776604592	0 Pkts	87 Pkts	26 Pkts	0 Pkts
1776603992	0 Pkts	44 Pkts	98 Pkts	0 Pkts
1776603392	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1776602607	0 Pkts	17 Pkts	99 Pkts	0 Pkts
1776602007	0 Pkts	136 Pkts	99 Pkts	0 Pkts
1776601407	0 Pkts	87 Pkts	99 Pkts	0 Pkts
1776600807	0 Pkts	36 Pkts	98 Pkts	0 Pkts
1776600207	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1776600099	0 Pkts	170 Pkts	98 Pkts	0 Pkts
1776599108	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1776598728	0 Pkts	162 Pkts	82 Pkts	0 Pkts
1776598128	0 Pkts	159 Pkts	83 Pkts	0 Pkts
1776597528	0 Pkts	143 Pkts	81 Pkts	0 Pkts
1776595847	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1776595441	2 Pkts	211 Pkts	99 Pkts	33 Pkts

*Used Equation Coefficients:

RF2INET: 0, 1, 0

INET2RF: 0, 1, 0

RxPkts: 0, 1, 0

TxPkts: 0, 1, 0

DropRx: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)