G8FJG-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object G8FJG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1787598805	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787597005	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787595204	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787593404	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787591604	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787590430	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787588630	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787586830	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787585030	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787583230	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787581430	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787573723	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787571922	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787570122	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787568322	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787568137	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787567995	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787566453	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787564653	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787562853	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787561053	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787559253	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787557453	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787555653	0 Count	74 Count	0 Count	0 VDC	0 VDC
1787553853	0 Count	74 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)