DJ2FR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DJ2FR-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1765500528	962.5 hPa	21 C deg	51.1 %	42 -	0 C deg
1765498713	962.4 hPa	21 C deg	51.2 %	42 -	0 C deg
1765496898	962.7 hPa	21.1 C deg	51.3 %	41 -	0 C deg
1765495083	962.8 hPa	21.1 C deg	51.3 %	41 -	0 C deg
1765493267	962.9 hPa	21.2 C deg	51.5 %	40 -	0 C deg
1765489637	962.8 hPa	21.3 C deg	52.1 %	39 -	0 C deg
1765487824	963 hPa	21.3 C deg	52.1 %	38 -	0 C deg
1765484193	963.2 hPa	21.4 C deg	52.5 %	38 -	0 C deg
1765482378	963.2 hPa	21.4 C deg	53 %	37 -	0 C deg
1765480578	963.2 hPa	21.8 C deg	52.3 %	48 -	0 C deg
1765347724	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg
1765345908	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg
1765344094	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg
1765342279	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg
1765340464	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg
1765338648	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg
1765336834	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg
1765335019	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg
1765333204	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg
1765331388	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg
1765325943	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg
1765324127	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg
1765320498	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg
1765318683	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg
1765316868	957.9 hPa	24.5 C deg	44.3 %	41 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)