IU1VDW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU1VDW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1788567307	0 Count	134 Count	0 Count	0 VDC	0 VDC
1788566407	0 Count	131 Count	0 Count	0 VDC	0 VDC
1788565507	0 Count	127 Count	0 Count	0 VDC	0 VDC
1788564607	0 Count	123 Count	0 Count	0 VDC	0 VDC
1788563707	0 Count	121 Count	0 Count	0 VDC	0 VDC
1788562807	0 Count	118 Count	0 Count	0 VDC	0 VDC
1788561907	0 Count	114 Count	0 Count	0 VDC	0 VDC
1788561007	0 Count	109 Count	0 Count	0 VDC	0 VDC
1788560107	0 Count	107 Count	0 Count	0 VDC	0 VDC
1788559207	0 Count	105 Count	0 Count	0 VDC	0 VDC
1788558307	0 Count	101 Count	0 Count	0 VDC	0 VDC
1788557407	0 Count	96 Count	0 Count	0 VDC	0 VDC
1788556507	0 Count	94 Count	0 Count	0 VDC	0 VDC
1788555607	0 Count	90 Count	0 Count	0 VDC	0 VDC
1788554707	0 Count	86 Count	0 Count	0 VDC	0 VDC
1788553807	0 Count	82 Count	0 Count	0 VDC	0 VDC
1788552906	0 Count	80 Count	0 Count	0 VDC	0 VDC
1788552006	0 Count	76 Count	0 Count	0 VDC	0 VDC
1788551106	0 Count	71 Count	0 Count	0 VDC	0 VDC
1788550206	0 Count	67 Count	0 Count	0 VDC	0 VDC
1788549306	0 Count	65 Count	0 Count	0 VDC	0 VDC
1788548413	0 Count	62 Count	0 Count	0 VDC	0 VDC
1788547513	0 Count	57 Count	0 Count	0 VDC	0 VDC
1788546613	0 Count	53 Count	0 Count	0 VDC	0 VDC
1788545713	0 Count	51 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)