DB3KE-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB3KE-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1787565829	1009.5 hPa	0 C deg	0 %	1022.7 hPa	0 C deg
1787562175	1011 hPa	0 C deg	0 %	1024.3 hPa	0 C deg
1787560341	1010.7 hPa	0 C deg	0 %	1024.1 hPa	0 C deg
1787558508	1013.2 hPa	0 C deg	0 %	1026.7 hPa	0 C deg
1787556677	1011.9 hPa	18.5 C deg	43.4 %	1025.5 hPa	0 C deg
1787554845	1011.5 hPa	0 C deg	0 %	1025.2 hPa	0 C deg
1787553017	1013.3 hPa	0 C deg	0 %	1027.1 hPa	0 C deg
1787551183	1012.5 hPa	0 C deg	0 %	1026.5 hPa	0 C deg
1787549355	1012.7 hPa	0 C deg	0 %	1026.7 hPa	0 C deg
1787547523	1012.4 hPa	8.8 C deg	32.6 %	1026.4 hPa	0 C deg
1787545691	1012.1 hPa	0 C deg	0 %	1026.1 hPa	0 C deg
1787543862	1011.9 hPa	9.7 C deg	32.7 %	1025.9 hPa	0 C deg
1787542029	1012.2 hPa	0 C deg	0 %	1026.2 hPa	0 C deg
1787540200	1012.3 hPa	9.7 C deg	32.8 %	1026.3 hPa	0 C deg
1787536539	1012.6 hPa	0 C deg	0 %	1026.5 hPa	0 C deg
1787534708	1012.8 hPa	0 C deg	0 %	1026.7 hPa	0 C deg
1787532878	1012.3 hPa	11.4 C deg	32.8 %	1026.2 hPa	0 C deg
1787531044	1012.3 hPa	0 C deg	0 %	1026.2 hPa	0 C deg
1787529217	1012.7 hPa	0 C deg	0 %	1026.6 hPa	0 C deg
1787527385	1012.6 hPa	0 C deg	0 %	1026.5 hPa	0 C deg
1787525554	1012.8 hPa	0 C deg	0 %	1026.6 hPa	0 C deg
1787521890	1012.7 hPa	0 C deg	0 %	1026.6 hPa	0 C deg
1787520061	1012.8 hPa	12.6 C deg	33.1 %	1026.7 hPa	0 C deg
1787518231	1012.3 hPa	0 C deg	0 %	1026.2 hPa	0 C deg
1787516398	1012.1 hPa	14.1 C deg	33.2 %	1025.9 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)