LD7VD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LD7VD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp ute*	Temp mast*	Temp hus*	Trafikk wan*	V Batt*
1788650694	7.5 C	15 C	13.5 C	16.74 kbps	13.2 Volt
1788650098	7.5 C	15 C	13.5 C	16.78 kbps	13.2 Volt
1788649518	7.5 C	15.5 C	13.5 C	16.55 kbps	13.2 Volt
1788648868	7.5 C	15.5 C	14 C	50.65 kbps	13.2 Volt
1788648278	7.5 C	15.5 C	14 C	16.61 kbps	13.19 Volt
1788647658	7.5 C	15.5 C	14 C	16.71 kbps	13.19 Volt
1788647049	7.5 C	15.5 C	14 C	17.21 kbps	13.19 Volt
1788646466	8 C	15.5 C	14 C	16.67 kbps	13.2 Volt
1788645918	8 C	16 C	14 C	16.99 kbps	13.2 Volt
1788645356	8 C	16 C	14 C	17.06 kbps	13.2 Volt
1788644753	8 C	16 C	14.5 C	16.8 kbps	13.2 Volt
1788644133	8 C	16 C	14.5 C	17.04 kbps	13.2 Volt
1788643563	8 C	16 C	14.5 C	16.77 kbps	13.21 Volt
1788642953	8 C	16 C	14.5 C	16.79 kbps	13.21 Volt
1788642354	8 C	16.5 C	14.5 C	16.48 kbps	13.21 Volt
1788641769	8 C	16.5 C	14.5 C	17.54 kbps	13.2 Volt
1788641153	8 C	16.5 C	14.5 C	18.9 kbps	13.2 Volt
1788640572	8 C	16.5 C	15 C	18.98 kbps	13.2 Volt
1788640013	8 C	16.5 C	15 C	18.04 kbps	13.2 Volt
1788639372	8 C	17 C	15 C	20.09 kbps	13.2 Volt
1788638818	8 C	17 C	15 C	19 kbps	13.2 Volt
1788638211	8 C	17 C	15 C	17.74 kbps	13.2 Volt
1788637653	8.5 C	17.5 C	15.5 C	18.53 kbps	13.19 Volt
1788637058	8.5 C	17.5 C	15.5 C	14.81 kbps	13.18 Volt
1788636442	8.5 C	17.5 C	15.5 C	17.46 kbps	13.19 Volt

*Used Equation Coefficients:

Temp ute: 0, 0.5, -64

Temp mast: 0, 0.5, -64

Temp hus: 0, 0.5, -64

Trafikk wan: 0, 1, 0

V Batt: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)