SR1GPS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR1GPS. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1789926641	12.45 Volt	90 Pkt	40 Pkt	82 Pcnt
1789926349	12.45 Volt	90 Pkt	40 Pkt	84 Pcnt
1789926348	12.45 Volt	90 Pkt	40 Pkt	84 Pcnt
1789926041	12.45 Volt	90 Pkt	40 Pkt	89 Pcnt
1789925743	12.45 Volt	90 Pkt	40 Pkt	89 Pcnt
1789925741	12.45 Volt	90 Pkt	40 Pkt	89 Pcnt
1789925441	12.45 Volt	90 Pkt	40 Pkt	90 Pcnt
1789925143	12.45 Volt	80 Pkt	40 Pkt	89 Pcnt
1789925141	12.45 Volt	80 Pkt	40 Pkt	89 Pcnt
1789924841	12.45 Volt	80 Pkt	30 Pkt	91 Pcnt
1789924548	12.45 Volt	80 Pkt	30 Pkt	92 Pcnt
1789924548	12.45 Volt	80 Pkt	30 Pkt	92 Pcnt
1789924241	12.45 Volt	80 Pkt	30 Pkt	92 Pcnt
1789923943	12.45 Volt	80 Pkt	30 Pkt	94 Pcnt
1789923941	12.45 Volt	80 Pkt	30 Pkt	94 Pcnt
1789923641	12.45 Volt	80 Pkt	40 Pkt	93 Pcnt
1789923343	12.45 Volt	80 Pkt	30 Pkt	93 Pcnt
1789923341	12.45 Volt	80 Pkt	30 Pkt	93 Pcnt
1789923041	12.45 Volt	90 Pkt	40 Pkt	92 Pcnt
1789922743	12.45 Volt	90 Pkt	40 Pkt	93 Pcnt
1789922741	12.45 Volt	90 Pkt	40 Pkt	93 Pcnt
1789922441	12.45 Volt	100 Pkt	40 Pkt	94 Pcnt
1789922143	12.45 Volt	100 Pkt	40 Pkt	92 Pcnt
1789922141	12.45 Volt	100 Pkt	40 Pkt	92 Pcnt
1789921841	12.45 Volt	100 Pkt	50 Pkt	92 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)