KJ5JVS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KJ5JVS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1789860545	22 Pkts	21 Pkts	2 Pkts	22 C
1789856945	22 Pkts	20 Pkts	1 Pkts	21 C
1789853345	21 Pkts	20 Pkts	1 Pkts	21 C
1789849772	23 Pkts	21 Pkts	2 Pkts	21 C
1789846145	22 Pkts	20 Pkts	1 Pkts	21 C
1789842545	21 Pkts	19 Pkts	1 Pkts	22 C
1789838945	23 Pkts	21 Pkts	1 Pkts	24 C
1789835345	20 Pkts	20 Pkts	1 Pkts	23 C
1789831745	20 Pkts	19 Pkts	1 Pkts	22 C
1789828145	21 Pkts	20 Pkts	1 Pkts	22 C
1789824545	20 Pkts	20 Pkts	1 Pkts	23 C
1789820945	20 Pkts	20 Pkts	1 Pkts	22 C
1789817345	22 Pkts	22 Pkts	2 Pkts	23 C
1789813745	22 Pkts	22 Pkts	1 Pkts	23 C
1789810145	24 Pkts	24 Pkts	4 Pkts	23 C
1789806545	21 Pkts	21 Pkts	1 Pkts	23 C
1789802945	40 Pkts	40 Pkts	14 Pkts	23 C
1789799350	25 Pkts	25 Pkts	5 Pkts	23 C
1789795745	29 Pkts	29 Pkts	7 Pkts	22 C
1789792155	29 Pkts	29 Pkts	9 Pkts	22 C
1789788545	22 Pkts	20 Pkts	1 Pkts	23 C
1789784945	24 Pkts	22 Pkts	3 Pkts	23 C
1789781345	21 Pkts	19 Pkts	1 Pkts	23 C
1789777745	22 Pkts	20 Pkts	1 Pkts	23 C
1789774145	27 Pkts	25 Pkts	6 Pkts	22 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)