SR2KW-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR2KW-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1761651002	35 Deg.C	3 %
1761649805	36 Deg.C	3 %
1761648002	38 Deg.C	3 %
1761646801	37 Deg.C	3 %
1761646202	36 Deg.C	3 %
1761645002	38 Deg.C	3 %
1761644405	38 Deg.C	3 %
1761643802	36 Deg.C	3 %
1761643210	38 Deg.C	3 %
1761642601	36 Deg.C	2 %
1761642002	37 Deg.C	3 %
1761641405	38 Deg.C	3 %
1761640801	39 Deg.C	3 %
1761640205	37 Deg.C	2 %
1761639601	36 Deg.C	2 %
1761639010	36 Deg.C	2 %
1761638401	38 Deg.C	2 %
1761637802	39 Deg.C	2 %
1761637205	37 Deg.C	2 %
1761636602	35 Deg.C	2 %
1761636005	35 Deg.C	2 %
1761635401	35 Deg.C	2 %
1761634805	35 Deg.C	2 %
1761634201	37 Deg.C	2 %
1761633601	35 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)