SU1TA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SU1TA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1782269390	824 Count	0 Count	0 Count	0 VDC	0 VDC
1782268489	823 Count	0 Count	0 Count	0 VDC	0 VDC
1782267588	822 Count	0 Count	0 Count	0 VDC	0 VDC
1782266718	821 Count	0 Count	0 Count	0 VDC	0 VDC
1782265804	820 Count	0 Count	0 Count	0 VDC	0 VDC
1782264903	819 Count	0 Count	0 Count	0 VDC	0 VDC
1782264002	818 Count	0 Count	0 Count	0 VDC	0 VDC
1782263101	817 Count	0 Count	0 Count	0 VDC	0 VDC
1782262201	816 Count	0 Count	0 Count	0 VDC	0 VDC
1782261300	815 Count	0 Count	0 Count	0 VDC	0 VDC
1782260399	814 Count	0 Count	0 Count	0 VDC	0 VDC
1782259498	813 Count	0 Count	0 Count	0 VDC	0 VDC
1782258598	812 Count	0 Count	0 Count	0 VDC	0 VDC
1782257697	811 Count	0 Count	0 Count	0 VDC	0 VDC
1782256799	810 Count	0 Count	0 Count	0 VDC	0 VDC
1782255895	809 Count	0 Count	0 Count	0 VDC	0 VDC
1782254995	808 Count	0 Count	0 Count	0 VDC	0 VDC
1782254094	807 Count	0 Count	0 Count	0 VDC	0 VDC
1782253193	806 Count	0 Count	0 Count	0 VDC	0 VDC
1782252293	805 Count	0 Count	0 Count	0 VDC	0 VDC
1782251392	804 Count	0 Count	0 Count	0 VDC	0 VDC
1782250491	803 Count	0 Count	0 Count	0 VDC	0 VDC
1782249590	802 Count	0 Count	0 Count	0 VDC	0 VDC
1782248689	801 Count	0 Count	0 Count	0 VDC	0 VDC
1782247789	800 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)