SP4MGL-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP4MGL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	TX*	RX*	V_Bat*	V_Ext*
1761535906	83 Count	34 Count	5 VDC	0.14 VDC
1761535403	82 Count	33 Count	4.96 VDC	0.14 VDC
1761534800	81 Count	32 Count	5.01 VDC	0.14 VDC
1761534198	80 Count	32 Count	5 VDC	0.14 VDC
1761533595	79 Count	31 Count	5 VDC	0.14 VDC
1761532992	78 Count	30 Count	5.01 VDC	0.14 VDC
1761532389	77 Count	30 Count	5 VDC	0.14 VDC
1761531786	76 Count	29 Count	4.96 VDC	0.14 VDC
1761531184	75 Count	29 Count	5 VDC	0.14 VDC
1761530581	74 Count	29 Count	5 VDC	0.14 VDC
1761529978	73 Count	28 Count	5.03 VDC	0.14 VDC
1761529375	72 Count	27 Count	4.99 VDC	0.14 VDC
1761528772	71 Count	27 Count	4.94 VDC	0.14 VDC
1761528170	70 Count	26 Count	5 VDC	0.14 VDC
1761527567	69 Count	25 Count	5 VDC	0.14 VDC
1761526964	68 Count	25 Count	5.03 VDC	0.14 VDC
1761526361	67 Count	24 Count	5 VDC	0.14 VDC
1761525758	66 Count	23 Count	5 VDC	0.14 VDC
1761525156	65 Count	23 Count	4.96 VDC	0.14 VDC
1761524553	64 Count	22 Count	5 VDC	0.14 VDC
1761523950	63 Count	21 Count	5 VDC	0.14 VDC
1761522142	60 Count	19 Count	5 VDC	0.14 VDC
1761521540	59 Count	19 Count	5 VDC	0.14 VDC
1761520936	58 Count	18 Count	5.02 VDC	0.14 VDC
1761519730	56 Count	17 Count	5.03 VDC	0.14 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)