OH7GGX-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OH7GGX-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Rx10m*	Eff1h*	EffTot*	A5*
1787817056	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787815677	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787814301	0 Pkt	0 Pkt	0 Pcnt	0 None	0 None
1787812917	0 Pkt	0 Pkt	0 Pcnt	0 None	0 None
1787811537	0 Pkt	0 Pkt	0 Pcnt	0 None	0 None
1787810157	0 Pkt	0 Pkt	0 Pcnt	0 None	0 None
1787808777	0 Pkt	0 Pkt	0 Pcnt	0 None	0 None
1787807397	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787806017	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787804637	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787803257	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787801877	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787800497	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787799117	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787797737	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787796357	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787794977	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787793597	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787792217	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787790837	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787789457	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787788077	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787786697	0 Pkt	0 Pkt	100 Pcnt	0 None	0 None
1787785317	0 Pkt	0 Pkt	0 Pcnt	0 None	0 None
1787783937	0 Pkt	0 Pkt	0 Pcnt	0 None	0 None

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Rx10m: 0, 10, 0

Eff1h: 0, 1, 0

EffTot: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)