DL9EBF-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL9EBF-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1781516900	1015.3 hPa	15.3 C deg	62.7 %	162 -	0 C deg
1781513271	1014.9 hPa	18.4 C deg	55.3 %	261 -	0 C deg
1781509637	1014.8 hPa	15.7 C deg	60.8 %	182 -	0 C deg
1781507822	1014.7 hPa	14.6 C deg	64.4 %	126 -	0 C deg
1781506016	1014.6 hPa	14.2 C deg	66.4 %	103 -	0 C deg
1781504193	1014.3 hPa	13.6 C deg	68.2 %	94 -	0 C deg
1781502373	1014.2 hPa	13 C deg	70 %	86 -	0 C deg
1781500561	1014.2 hPa	12.5 C deg	71.6 %	79 -	0 C deg
1781498744	1014.1 hPa	12.2 C deg	72.9 %	75 -	0 C deg
1781496933	1014.1 hPa	12.1 C deg	72.6 %	81 -	0 C deg
1781495111	1014 hPa	12 C deg	72.8 %	85 -	0 C deg
1781493295	1014 hPa	11.9 C deg	72.5 %	86 -	0 C deg
1781491479	1014 hPa	11.8 C deg	72.1 %	89 -	0 C deg
1781489663	1013.9 hPa	11.9 C deg	71.3 %	92 -	0 C deg
1781486039	1014.2 hPa	11.8 C deg	71 %	88 -	0 C deg
1781484215	1014.3 hPa	11.4 C deg	71.3 %	82 -	0 C deg
1781482407	1014.5 hPa	9.7 C deg	76.5 %	63 -	0 C deg
1781478773	1014.6 hPa	10.3 C deg	72.8 %	82 -	0 C deg
1781471512	1014.7 hPa	12.4 C deg	63.4 %	190 -	0 C deg
1781467876	1014.5 hPa	14 C deg	58.7 %	269 -	0 C deg
1781466065	1014.4 hPa	14.9 C deg	55.8 %	332 -	0 C deg
1781464246	1014.4 hPa	15.9 C deg	53.2 %	389 -	0 C deg
1781460624	1014.2 hPa	17.8 C deg	48.7 %	561 -	0 C deg
1781458796	1014.3 hPa	20.1 C deg	42.5 %	744 -	0 C deg
1781455164	1014.2 hPa	21.7 C deg	38.9 %	899 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)