SR5WWE-ND Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5WWE-ND. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1761535802	35 Deg.C	3 %
1761535205	36 Deg.C	3 %
1761534602	36 Deg.C	3 %
1761534005	38 Deg.C	3 %
1761533401	36 Deg.C	3 %
1761532802	37 Deg.C	3 %
1761532205	37 Deg.C	3 %
1761531602	37 Deg.C	3 %
1761531005	38 Deg.C	3 %
1761530401	36 Deg.C	3 %
1761529805	37 Deg.C	3 %
1761529202	38 Deg.C	3 %
1761528601	36 Deg.C	3 %
1761528005	38 Deg.C	3 %
1761527402	37 Deg.C	3 %
1761526806	38 Deg.C	3 %
1761526202	37 Deg.C	3 %
1761525605	37 Deg.C	3 %
1761524402	37 Deg.C	3 %
1761522605	37 Deg.C	3 %
1761522002	38 Deg.C	3 %
1761521405	37 Deg.C	3 %
1761520802	37 Deg.C	3 %
1761519602	38 Deg.C	3 %
1761518407	39 Deg.C	3 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)