IR1DD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR1DD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Charge*	Temp*	Pres*	Hum*
1772685801	13.2 Volt	-0.99 Amp	-0.5 GrdC	768 hPa	38.5 %hum
1772685178	13.2 Volt	-0.99 Amp	-0.5 GrdC	768 hPa	38 %hum
1772684561	13.2 Volt	-0.99 Amp	-0.5 GrdC	768.2 hPa	38 %hum
1772683942	13.2 Volt	-0.99 Amp	-0.5 GrdC	768 hPa	37.5 %hum
1772683328	13.2 Volt	-0.99 Amp	-0.5 GrdC	768 hPa	37.5 %hum
1772682718	13.2 Volt	-0.99 Amp	-0.5 GrdC	768 hPa	37 %hum
1772682103	13.2 Volt	-0.99 Amp	-0.25 GrdC	768.2 hPa	36.5 %hum
1772681487	13.2 Volt	-0.99 Amp	-0.25 GrdC	768.2 hPa	36.5 %hum
1772680883	13.2 Volt	-0.99 Amp	0 GrdC	768.2 hPa	36.5 %hum
1772680272	13.2 Volt	-0.99 Amp	0.25 GrdC	768.2 hPa	36 %hum
1772679715	13.2 Volt	-0.99 Amp	0.25 GrdC	768.2 hPa	36 %hum
1772679709	13.2 Volt	-0.99 Amp	0.25 GrdC	768 hPa	36 %hum
1772679667	13.2 Volt	-0.99 Amp	0.25 GrdC	768.2 hPa	36 %hum
1772679057	13.2 Volt	-0.99 Amp	0.25 GrdC	768 hPa	36 %hum
1772678441	13.2 Volt	-0.99 Amp	0 GrdC	768.2 hPa	36 %hum
1772677801	13.2 Volt	-0.99 Amp	0 GrdC	768.2 hPa	36 %hum
1772677192	13.2 Volt	-0.99 Amp	0 GrdC	768.2 hPa	36 %hum
1772676580	13.2 Volt	-0.99 Amp	0 GrdC	768.2 hPa	36 %hum
1772675964	13.2 Volt	-0.99 Amp	0 GrdC	768.4 hPa	35.5 %hum
1772675355	13.2 Volt	-0.99 Amp	0 GrdC	768.4 hPa	35 %hum
1772674727	13.2 Volt	-0.99 Amp	0 GrdC	768.6 hPa	35 %hum
1772674097	13.2 Volt	-0.99 Amp	0 GrdC	768.6 hPa	34.5 %hum
1772673477	13.2 Volt	-0.99 Amp	0.25 GrdC	768.6 hPa	34 %hum
1772672865	13.2 Volt	-0.99 Amp	0 GrdC	768.8 hPa	33.5 %hum
1772672254	13.2 Volt	-0.99 Amp	-0.25 GrdC	768.8 hPa	33.5 %hum

*Used Equation Coefficients:

Battery: 0, 0.1, 0

Charge: 0, 0.198, -25.344

Temp: 0, 0.25, -20.5

Pres: 0, 0.2, 734.8

Hum: 0, 0.5, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)