PP1GEC-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PP1GEC-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1785340176	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785336574	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785332969	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785329366	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785325763	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785322159	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785318556	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785314952	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785311349	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785307745	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785304142	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785300539	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785296935	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785293332	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785289728	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785286125	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785282522	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785278918	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785275315	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785271711	13.88 Volt	10 Pkt	10 Pkt	94 Pcnt
1785268108	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785264505	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785260901	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785257298	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt
1785253695	13.88 Volt	10 Pkt	10 Pkt	100 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)