DB0LSB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0LSB. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1785305291	13.8 Volt	330 Pkt	100 Pkt	53 Pcnt
1785304689	13.65 Volt	340 Pkt	100 Pkt	56 Pcnt
1785304091	13.5 Volt	320 Pkt	110 Pkt	57 Pcnt
1785303489	13.58 Volt	310 Pkt	110 Pkt	56 Pcnt
1785302892	13.65 Volt	320 Pkt	110 Pkt	57 Pcnt
1785302287	13.35 Volt	320 Pkt	110 Pkt	58 Pcnt
1785301095	13.35 Volt	320 Pkt	110 Pkt	57 Pcnt
1785299293	13.13 Volt	350 Pkt	120 Pkt	64 Pcnt
1785298684	12.83 Volt	350 Pkt	120 Pkt	65 Pcnt
1785298084	12.75 Volt	360 Pkt	140 Pkt	65 Pcnt
1785297484	12.75 Volt	380 Pkt	160 Pkt	66 Pcnt
1785296283	12.75 Volt	360 Pkt	140 Pkt	65 Pcnt
1785295682	12.75 Volt	340 Pkt	140 Pkt	63 Pcnt
1785295082	12.75 Volt	340 Pkt	130 Pkt	65 Pcnt
1785293280	12.75 Volt	300 Pkt	100 Pkt	60 Pcnt
1785292079	12.83 Volt	280 Pkt	90 Pkt	59 Pcnt
1785291479	12.83 Volt	270 Pkt	90 Pkt	57 Pcnt
1785290877	12.83 Volt	270 Pkt	80 Pkt	60 Pcnt
1785290277	12.83 Volt	270 Pkt	80 Pkt	61 Pcnt
1785289677	12.75 Volt	250 Pkt	70 Pkt	60 Pcnt
1785289075	12.83 Volt	260 Pkt	80 Pkt	61 Pcnt
1785288476	12.83 Volt	250 Pkt	80 Pkt	64 Pcnt
1785287875	12.83 Volt	240 Pkt	70 Pkt	62 Pcnt
1785287274	12.83 Volt	220 Pkt	70 Pkt	61 Pcnt
1785286673	12.83 Volt	200 Pkt	70 Pkt	60 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)