VO2AGO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VO2AGO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	GenHrs*	IndoorTemp*	FreezerTemp*	HatTemp*
1774212126	14.22 V	15.5 Hr	10.4 C	10.9 C	24.6 C
1774211826	14.17 V	15.5 Hr	10.5 C	10.9 C	24.6 C
1774211526	14.07 V	15.5 Hr	10.5 C	10.9 C	24.8 C
1774211226	14.09 V	15.5 Hr	10.6 C	10.9 C	24.6 C
1774210926	14.16 V	15.5 Hr	10.6 C	10.9 C	24.8 C
1774210626	14.24 V	15.5 Hr	10.6 C	10.9 C	24.8 C
1774210326	14.22 V	15.5 Hr	10.6 C	10.9 C	24.8 C
1774210025	14.21 V	15.5 Hr	10.7 C	11 C	24.7 C
1774209727	14.23 V	15.5 Hr	10.7 C	11 C	24.9 C
1774209426	14.22 V	15.5 Hr	10.7 C	11 C	24.8 C
1774209126	14.23 V	15.5 Hr	10.7 C	11 C	25 C
1774208826	14.16 V	15.5 Hr	10.8 C	11.1 C	24.9 C
1774208526	14.16 V	15.5 Hr	10.8 C	11.1 C	25 C
1774208227	14.17 V	15.5 Hr	10.8 C	11.1 C	25.1 C
1774207926	14.26 V	15.5 Hr	10.8 C	11.1 C	24.9 C
1774207626	14.32 V	15.5 Hr	10.8 C	11.1 C	24.9 C
1774207326	14.36 V	15.5 Hr	10.8 C	11.1 C	25.1 C
1774207026	14.33 V	15.5 Hr	10.8 C	11.1 C	24.9 C
1774206726	14.21 V	15.5 Hr	10.8 C	11.1 C	24.9 C
1774206426	14.21 V	15.5 Hr	10.8 C	11.1 C	25.3 C
1774206127	14.26 V	15.5 Hr	10.9 C	11.2 C	25.4 C
1774205827	14.28 V	15.5 Hr	10.9 C	11.2 C	25.5 C
1774205526	14.25 V	15.5 Hr	10.9 C	11.2 C	25.4 C
1774205227	14.22 V	15.5 Hr	10.9 C	11.2 C	25.5 C
1774204926	14.26 V	15.5 Hr	10.9 C	11.2 C	25.5 C

*Used Equation Coefficients:

Battery: 0, 0.01, 0

GenHrs: 0, 0.1, 0

IndoorTemp: 0, 0.01, -50

FreezerTemp: 0, 0.01, -50

HatTemp: 0, 0.01, -30

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)