VA2HQL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA2HQL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	BattLevel*	BattVolt*	BattTemp*	LineVolt*
1773217144	82 %	13.44 Vdc	-1.64 degC	123 Vac
1773215346	82 %	13.46 Vdc	-1.46 degC	124 Vac
1773214448	83 %	13.47 Vdc	-1.37 degC	124 Vac
1773213545	82 %	13.44 Vdc	-1.27 degC	124 Vac
1773211745	83 %	13.48 Vdc	-1.09 degC	124 Vac
1773210847	82 %	13.44 Vdc	-0.98 degC	123 Vac
1773209948	82 %	13.46 Vdc	-0.85 degC	124 Vac
1773209048	83 %	13.48 Vdc	-0.75 degC	124 Vac
1773208145	81 %	13.45 Vdc	-0.63 degC	124 Vac
1773207247	82 %	13.44 Vdc	-0.51 degC	124 Vac
1773206344	83 %	13.48 Vdc	-0.41 degC	124 Vac
1773205447	81 %	13.42 Vdc	-0.26 degC	124 Vac
1773204545	82 %	13.45 Vdc	-0.1 degC	124 Vac
1773203647	83 %	13.48 Vdc	0.02 degC	124 Vac
1773202745	81 %	13.43 Vdc	0.08 degC	124 Vac
1773201847	81 %	13.45 Vdc	0.19 degC	123 Vac
1773200944	83 %	13.48 Vdc	0.37 degC	123 Vac
1773199145	81 %	13.42 Vdc	0.58 degC	124 Vac
1773197345	81 %	13.43 Vdc	0.83 degC	124 Vac
1773195545	82 %	13.47 Vdc	1.15 degC	124 Vac
1773194646	81 %	13.43 Vdc	1.22 degC	124 Vac
1773193746	81 %	13.45 Vdc	1.36 degC	124 Vac
1773192845	83 %	13.49 Vdc	1.49 degC	124 Vac
1773191944	80 %	13.38 Vdc	1.56 degC	125 Vac
1773190144	83 %	13.49 Vdc	1.85 degC	124 Vac

*Used Equation Coefficients:

BattLevel: 0, 1, 0

BattVolt: 0, 0.01, 0

BattTemp: 0, 0.01, 0

LineVolt: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)