VK2RMM-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RMM-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*
1787588254	146	160	248
1787586423	146	159	248
1787584597	146	160	249
1787582769	146	159	247
1787580937	146	159	248
1787579115	146	159	248
1787577280	146	160	247
1787575451	146	160	248
1787573620	146	160	247
1787568130	146	161	248
1787564462	146	161	247
1787562629	147	161	249
1787560799	147	161	247
1787558966	147	161	249
1787557126	146	162	248
1787555281	147	164	250
1787553443	147	171	250
1787551611	147	168	250
1787547947	147	174	250
1787546124	146	176	249
1787540659	147	175	249
1787538833	146	187	252
1787537010	146	182	251
1787535194	146	183	251
1787533372	146	186	252

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)