E24CR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E24CR-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1765530516	11 ug/m3	18 ug/m3	19 ug/m3	-26 dBm	13.54 V
1765529884	16 ug/m3	24 ug/m3	27 ug/m3	-27 dBm	13.58 V
1765529256	15 ug/m3	22 ug/m3	24 ug/m3	-27 dBm	13.64 V
1765528628	14 ug/m3	20 ug/m3	22 ug/m3	-26 dBm	13.82 V
1765528003	14 ug/m3	21 ug/m3	23 ug/m3	-26 dBm	13.68 V
1765526750	14 ug/m3	21 ug/m3	23 ug/m3	-26 dBm	13.9 V
1765526124	15 ug/m3	22 ug/m3	25 ug/m3	-26 dBm	13.68 V
1765525496	15 ug/m3	23 ug/m3	25 ug/m3	-26 dBm	13.64 V
1765524869	15 ug/m3	22 ug/m3	24 ug/m3	-26 dBm	13.7 V
1765524244	14 ug/m3	22 ug/m3	25 ug/m3	-26 dBm	13.6 V
1765523618	17 ug/m3	26 ug/m3	29 ug/m3	-26 dBm	13.7 V
1765522997	18 ug/m3	27 ug/m3	31 ug/m3	-26 dBm	13.82 V
1765522368	18 ug/m3	28 ug/m3	34 ug/m3	-26 dBm	14.19 V
1765521740	19 ug/m3	29 ug/m3	35 ug/m3	-26 dBm	14.05 V
1765521115	19 ug/m3	30 ug/m3	35 ug/m3	-26 dBm	13.97 V
1765520490	20 ug/m3	30 ug/m3	35 ug/m3	-26 dBm	13.9 V
1765519864	21 ug/m3	32 ug/m3	37 ug/m3	-26 dBm	13.88 V
1765519239	22 ug/m3	33 ug/m3	39 ug/m3	-26 dBm	13.68 V
1765518614	21 ug/m3	32 ug/m3	38 ug/m3	-26 dBm	13.8 V
1765517987	20 ug/m3	31 ug/m3	35 ug/m3	-26 dBm	13.8 V
1765517360	21 ug/m3	32 ug/m3	37 ug/m3	-26 dBm	13.33 V
1765516734	21 ug/m3	32 ug/m3	38 ug/m3	-26 dBm	13.41 V
1765516109	22 ug/m3	33 ug/m3	39 ug/m3	-26 dBm	13.37 V
1765515483	21 ug/m3	33 ug/m3	39 ug/m3	-26 dBm	13.43 V
1765514856	21 ug/m3	33 ug/m3	38 ug/m3	-26 dBm	13.47 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)