UR7D-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object UR7D-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	A5*
1761504530	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761504230	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761503930	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761503630	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761503330	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761503030	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761502734	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761502430	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761502130	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761501830	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761501530	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761501230	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761500634	13.88 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761500330	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761500030	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761499730	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761499430	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761499130	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761498830	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761498236	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761497630	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761497030	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761496730	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761496430	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1761496130	13.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)