IU5IBB-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU5IBB-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1765420713	13.88 Volt	380 Pkt	90 Pkt	88 Pcnt
1765420114	13.88 Volt	400 Pkt	90 Pkt	88 Pcnt
1765419512	13.88 Volt	430 Pkt	90 Pkt	89 Pcnt
1765418914	13.88 Volt	420 Pkt	100 Pkt	87 Pcnt
1765418314	13.88 Volt	390 Pkt	90 Pkt	86 Pcnt
1765415910	13.88 Volt	170 Pkt	40 Pkt	76 Pcnt
1765415310	13.88 Volt	120 Pkt	30 Pkt	76 Pcnt
1765414710	13.88 Volt	100 Pkt	20 Pkt	73 Pcnt
1765414111	13.88 Volt	100 Pkt	20 Pkt	69 Pcnt
1765413511	13.88 Volt	110 Pkt	20 Pkt	70 Pcnt
1765412911	13.88 Volt	110 Pkt	20 Pkt	72 Pcnt
1765412311	13.88 Volt	120 Pkt	20 Pkt	71 Pcnt
1765411711	13.88 Volt	120 Pkt	20 Pkt	70 Pcnt
1765411111	13.88 Volt	150 Pkt	30 Pkt	72 Pcnt
1765410511	13.88 Volt	200 Pkt	40 Pkt	77 Pcnt
1765409911	13.88 Volt	240 Pkt	50 Pkt	78 Pcnt
1765409311	13.88 Volt	300 Pkt	70 Pkt	81 Pcnt
1765408711	13.88 Volt	370 Pkt	90 Pkt	83 Pcnt
1765408111	13.88 Volt	410 Pkt	100 Pkt	83 Pcnt
1765407511	13.88 Volt	450 Pkt	110 Pkt	83 Pcnt
1765406911	13.88 Volt	440 Pkt	100 Pkt	84 Pcnt
1765406311	13.88 Volt	460 Pkt	110 Pkt	83 Pcnt
1765405711	13.88 Volt	450 Pkt	110 Pkt	83 Pcnt
1765405111	13.88 Volt	450 Pkt	100 Pkt	82 Pcnt
1765404511	13.8 Volt	470 Pkt	100 Pkt	83 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)