DM7HF-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM7HF-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humi*
1753642771	28.3 deg C	53.6 %
1753641864	28.6 deg C	53.9 %
1753641540	28.7 deg C	53.8 %
1753639739	28.8 deg C	52.1 %
1753637940	29.3 deg C	50.3 %
1753637035	29.6 deg C	50.2 %
1753636132	29.7 deg C	49.7 %
1753635235	30.1 deg C	49.4 %
1753634332	30.5 deg C	48.3 %
1753633437	30.9 deg C	47.8 %
1753632540	31.2 deg C	47.3 %
1753631624	31.8 deg C	46.2 %
1753630729	32.3 deg C	45.7 %
1753629832	32.1 deg C	46.1 %
1753628615	32.2 deg C	45.8 %
1753627711	32.5 deg C	45.5 %
1753622310	45.2 deg C	31.4 %
1753620505	39.1 deg C	37.4 %
1753616606	50.4 deg C	28.3 %
1753615701	42.2 deg C	33.6 %
1753613901	39.9 deg C	37.4 %
1753613004	41.1 deg C	36.1 %
1753612128	42.1 deg C	36 %
1753611206	44 deg C	33.2 %
1753608486	36.9 deg C	42.3 %

*Used Equation Coefficients:

Temp: 0, 0.1, 0

Humi: 0, 0.1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)