W0RFP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W0RFP-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	DC*	Rx1h*	Dg1h*	Eff1h*	Temp*
1772774828	13.95 V	70 Pkt	30 Pkt	62 Pcnt	28 F
1772774528	13.95 V	70 Pkt	30 Pkt	62 Pcnt	28 F
1772774228	13.95 V	60 Pkt	30 Pkt	59 Pcnt	28 F
1772773928	13.95 V	60 Pkt	30 Pkt	59 Pcnt	28 F
1772773629	13.95 V	60 Pkt	30 Pkt	61 Pcnt	28 F
1772773329	13.95 V	70 Pkt	30 Pkt	60 Pcnt	28 F
1772773029	13.95 V	70 Pkt	30 Pkt	62 Pcnt	28 F
1772772729	13.95 V	70 Pkt	30 Pkt	62 Pcnt	28 F
1772772439	13.95 V	70 Pkt	30 Pkt	57 Pcnt	28 F
1772772129	13.95 V	70 Pkt	30 Pkt	59 Pcnt	28 F
1772771829	13.95 V	80 Pkt	30 Pkt	61 Pcnt	28 F
1772771529	13.95 V	80 Pkt	40 Pkt	63 Pcnt	28 F
1772771229	13.95 V	90 Pkt	40 Pkt	62 Pcnt	28 F
1772770929	13.95 V	90 Pkt	40 Pkt	57 Pcnt	28 F
1772770629	13.95 V	90 Pkt	40 Pkt	56 Pcnt	28 F
1772770329	13.95 V	90 Pkt	40 Pkt	54 Pcnt	28 F
1772770029	13.95 V	80 Pkt	40 Pkt	52 Pcnt	28 F
1772769729	13.95 V	80 Pkt	40 Pkt	52 Pcnt	28 F
1772769429	13.95 V	80 Pkt	30 Pkt	49 Pcnt	28 F
1772769129	13.95 V	80 Pkt	30 Pkt	51 Pcnt	28 F
1772768829	13.95 V	80 Pkt	30 Pkt	56 Pcnt	28 F
1772768529	13.95 V	80 Pkt	30 Pkt	52 Pcnt	28 F
1772768229	13.95 V	80 Pkt	40 Pkt	54 Pcnt	28 F
1772767929	13.95 V	80 Pkt	40 Pkt	52 Pcnt	28 F
1772767638	13.95 V	80 Pkt	40 Pkt	55 Pcnt	28 F

*Used Equation Coefficients:

DC: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 1, -100

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)