OE3RNB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3RNB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	EffTo*
1757586452	13.75 Volt	530 Pkt	81 Pcnt	80 None
1757586152	13.75 Volt	520 Pkt	82 Pcnt	80 None
1757585851	13.75 Volt	510 Pkt	80 Pcnt	80 None
1757585551	13.75 Volt	500 Pkt	80 Pcnt	80 None
1757585251	13.67 Volt	490 Pkt	79 Pcnt	80 None
1757584953	13.75 Volt	480 Pkt	79 Pcnt	80 None
1757584950	13.75 Volt	480 Pkt	79 Pcnt	80 None
1757584650	13.75 Volt	470 Pkt	78 Pcnt	80 None
1757584350	13.75 Volt	460 Pkt	78 Pcnt	80 None
1757584050	13.67 Volt	470 Pkt	79 Pcnt	80 None
1757583749	13.75 Volt	450 Pkt	78 Pcnt	80 None
1757583449	13.75 Volt	440 Pkt	77 Pcnt	80 None
1757583149	13.75 Volt	440 Pkt	75 Pcnt	80 None
1757582848	13.75 Volt	440 Pkt	74 Pcnt	80 None
1757582548	13.75 Volt	460 Pkt	74 Pcnt	80 None
1757582248	13.75 Volt	470 Pkt	74 Pcnt	80 None
1757581948	13.75 Volt	470 Pkt	75 Pcnt	80 None
1757581647	13.67 Volt	480 Pkt	74 Pcnt	80 None
1757581347	13.75 Volt	490 Pkt	75 Pcnt	80 None
1757581047	13.75 Volt	490 Pkt	75 Pcnt	80 None
1757580747	13.75 Volt	530 Pkt	74 Pcnt	80 None
1757580446	13.67 Volt	540 Pkt	73 Pcnt	80 None
1757580146	13.75 Volt	590 Pkt	72 Pcnt	80 None
1757579846	13.75 Volt	610 Pkt	72 Pcnt	80 None
1757579545	13.75 Volt	630 Pkt	73 Pcnt	80 None

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTo: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)