W7DOA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W7DOA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784678703	12.45 Volt	130 Pkt	90 Pkt	100 Pcnt
1784678103	12.45 Volt	130 Pkt	90 Pkt	100 Pcnt
1784677503	12.45 Volt	130 Pkt	90 Pkt	99 Pcnt
1784676903	12.45 Volt	130 Pkt	90 Pkt	99 Pcnt
1784675702	12.45 Volt	130 Pkt	90 Pkt	99 Pcnt
1784675102	12.45 Volt	130 Pkt	90 Pkt	99 Pcnt
1784674529	12.45 Volt	130 Pkt	90 Pkt	100 Pcnt
1784673903	12.45 Volt	130 Pkt	90 Pkt	100 Pcnt
1784673302	12.45 Volt	130 Pkt	90 Pkt	100 Pcnt
1784672703	12.45 Volt	120 Pkt	80 Pkt	100 Pcnt
1784672102	12.45 Volt	120 Pkt	80 Pkt	100 Pcnt
1784671502	12.45 Volt	110 Pkt	80 Pkt	100 Pcnt
1784670902	12.45 Volt	110 Pkt	80 Pkt	100 Pcnt
1784670302	12.45 Volt	110 Pkt	80 Pkt	100 Pcnt
1784669702	12.45 Volt	110 Pkt	80 Pkt	98 Pcnt
1784668503	12.45 Volt	110 Pkt	80 Pkt	98 Pcnt
1784667902	12.45 Volt	110 Pkt	80 Pkt	98 Pcnt
1784667302	12.45 Volt	110 Pkt	80 Pkt	98 Pcnt
1784666702	12.45 Volt	110 Pkt	80 Pkt	98 Pcnt
1784665503	12.45 Volt	110 Pkt	80 Pkt	100 Pcnt
1784664903	12.45 Volt	120 Pkt	90 Pkt	100 Pcnt
1784664304	12.45 Volt	140 Pkt	100 Pkt	100 Pcnt
1784663702	12.45 Volt	150 Pkt	120 Pkt	100 Pcnt
1784663102	12.45 Volt	160 Pkt	130 Pkt	99 Pcnt
1784662504	12.45 Volt	170 Pkt	140 Pkt	99 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)