IW2HUZ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IW2HUZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10 m*	Rx1h*	Eff1h*	Dg1h*
1784680516	13.5 Volt	2 Pkt	60 Pkt	88 Pcnt	0 Pkt
1784680216	13.28 Volt	8 Pkt	60 Pkt	88 Pcnt	0 Pkt
1784679916	13.43 Volt	13 Pkt	60 Pkt	88 Pcnt	0 Pkt
1784679616	13.05 Volt	7 Pkt	60 Pkt	90 Pcnt	10 Pkt
1784679316	13.2 Volt	14 Pkt	50 Pkt	89 Pcnt	0 Pkt
1784679032	13.2 Volt	12 Pkt	50 Pkt	89 Pcnt	0 Pkt
1784678716	13.43 Volt	5 Pkt	60 Pkt	88 Pcnt	0 Pkt
1784678416	13.2 Volt	12 Pkt	60 Pkt	89 Pcnt	0 Pkt
1784678116	13.05 Volt	8 Pkt	50 Pkt	89 Pcnt	0 Pkt
1784677816	13.05 Volt	2 Pkt	50 Pkt	89 Pcnt	0 Pkt
1784677516	13.43 Volt	17 Pkt	60 Pkt	90 Pcnt	0 Pkt
1784677216	13.43 Volt	15 Pkt	50 Pkt	93 Pcnt	0 Pkt
1784676916	13.05 Volt	2 Pkt	60 Pkt	95 Pcnt	0 Pkt
1784676616	13.13 Volt	10 Pkt	60 Pkt	95 Pcnt	0 Pkt
1784676316	13.28 Volt	12 Pkt	60 Pkt	93 Pcnt	0 Pkt
1784676016	13.43 Volt	4 Pkt	60 Pkt	93 Pcnt	0 Pkt
1784675716	13.35 Volt	15 Pkt	60 Pkt	95 Pcnt	0 Pkt
1784675416	13.5 Volt	14 Pkt	60 Pkt	95 Pcnt	0 Pkt
1784675116	13.5 Volt	4 Pkt	60 Pkt	95 Pcnt	0 Pkt
1784674816	12.98 Volt	12 Pkt	60 Pkt	95 Pcnt	0 Pkt
1784674530	13.13 Volt	10 Pkt	60 Pkt	94 Pcnt	0 Pkt
1784674216	13.5 Volt	4 Pkt	60 Pkt	95 Pcnt	0 Pkt
1784673916	12.98 Volt	19 Pkt	60 Pkt	95 Pcnt	0 Pkt
1784673616	13.5 Volt	16 Pkt	60 Pkt	95 Pcnt	0 Pkt
1784673316	13.5 Volt	1 Pkt	60 Pkt	91 Pcnt	0 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10 m: 0, 1, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)