HB9BB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9BB. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1781376660	13.58 Volt	490 Pkt	200 Pkt	45 Pcnt
1781376433	13.65 Volt	490 Pkt	210 Pkt	45 Pcnt
1781376360	13.65 Volt	490 Pkt	210 Pkt	45 Pcnt
1781376360	13.65 Volt	490 Pkt	210 Pkt	45 Pcnt
1781376060	13.58 Volt	490 Pkt	200 Pkt	44 Pcnt
1781375765	13.28 Volt	460 Pkt	200 Pkt	43 Pcnt
1781375760	13.28 Volt	460 Pkt	200 Pkt	43 Pcnt
1781375460	13.35 Volt	460 Pkt	190 Pkt	43 Pcnt
1781375164	13.58 Volt	470 Pkt	210 Pkt	43 Pcnt
1781375160	13.58 Volt	470 Pkt	210 Pkt	43 Pcnt
1781374860	13.58 Volt	480 Pkt	220 Pkt	44 Pcnt
1781374564	13.58 Volt	480 Pkt	230 Pkt	44 Pcnt
1781374560	13.58 Volt	480 Pkt	230 Pkt	44 Pcnt
1781374260	13.58 Volt	480 Pkt	230 Pkt	43 Pcnt
1781373961	13.58 Volt	490 Pkt	240 Pkt	44 Pcnt
1781373960	13.58 Volt	490 Pkt	240 Pkt	44 Pcnt
1781373660	13.65 Volt	490 Pkt	250 Pkt	45 Pcnt
1781373365	13.65 Volt	490 Pkt	260 Pkt	45 Pcnt
1781373360	13.65 Volt	490 Pkt	260 Pkt	45 Pcnt
1781373060	13.58 Volt	490 Pkt	260 Pkt	46 Pcnt
1781372761	13.65 Volt	480 Pkt	250 Pkt	45 Pcnt
1781372760	13.65 Volt	480 Pkt	250 Pkt	45 Pcnt
1781372460	13.58 Volt	490 Pkt	250 Pkt	46 Pcnt
1781372161	13.43 Volt	500 Pkt	260 Pkt	48 Pcnt
1781372160	13.43 Volt	500 Pkt	260 Pkt	48 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)