ER-OE5XKL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ER-OE5XKL. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1772669129	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1772668544	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1772667929	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1772666729	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1772665529	0.12 RX Erlang	0.29 TX Erlang	133 RXcount/10m	2 TXcount/10m
1772664929	0.21 RX Erlang	0.27 TX Erlang	9 RXcount/10m	4 TXcount/10m
1772664329	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1772663729	0.15 RX Erlang	0.2 TX Erlang	11 RXcount/10m	3 TXcount/10m
1772663129	0.05 RX Erlang	0.11 TX Erlang	20 RXcount/10m	4 TXcount/10m
1772662529	0 RX Erlang	0.04 TX Erlang	2 RXcount/10m	2 TXcount/10m
1772661929	0.01 RX Erlang	0.15 TX Erlang	19 RXcount/10m	8 TXcount/10m
1772661329	0.01 RX Erlang	0.06 TX Erlang	4 RXcount/10m	2 TXcount/10m
1772660738	0 RX Erlang	0.02 TX Erlang	1 RXcount/10m	1 TXcount/10m
1772660129	0.13 RX Erlang	0.27 TX Erlang	61 RXcount/10m	5 TXcount/10m
1772658962	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1772658361	0.39 RX Erlang	0.42 TX Erlang	15 RXcount/10m	1 TXcount/10m
1772657761	0.14 RX Erlang	0.29 TX Erlang	50 RXcount/10m	6 TXcount/10m
1772657161	0.01 RX Erlang	0.06 TX Erlang	14 RXcount/10m	3 TXcount/10m
1772656561	0.31 RX Erlang	0.53 TX Erlang	248 RXcount/10m	3 TXcount/10m
1772655961	0.11 RX Erlang	0.19 TX Erlang	50 RXcount/10m	3 TXcount/10m
1772655361	0.37 RX Erlang	0.43 TX Erlang	61 RXcount/10m	2 TXcount/10m
1772654787	0.14 RX Erlang	0.19 TX Erlang	5 RXcount/10m	3 TXcount/10m
1772654161	0.06 RX Erlang	0.07 TX Erlang	1 RXcount/10m	1 TXcount/10m
1772653561	0.5 RX Erlang	0.99 TX Erlang	11 RXcount/10m	5 TXcount/10m
1772652961	0.54 RX Erlang	0.99 TX Erlang	5 RXcount/10m	4 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)