9W2GCC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2GCC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761526830	0.09 Rx Erlang	0.03 Tx Erlang	38 count/10m	0 count/10m	16 count/10m
1761525630	0.02 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	7 count/10m
1761524430	0.03 Rx Erlang	0.02 Tx Erlang	32 count/10m	0 count/10m	20 count/10m
1761523230	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	0 count/10m	10 count/10m
1761522030	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	0 count/10m	8 count/10m
1761520830	0.04 Rx Erlang	0.02 Tx Erlang	42 count/10m	0 count/10m	20 count/10m
1761519630	0.03 Rx Erlang	0.02 Tx Erlang	27 count/10m	0 count/10m	14 count/10m
1761518430	0.01 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	6 count/10m
1761517230	0.02 Rx Erlang	0.01 Tx Erlang	12 count/10m	0 count/10m	6 count/10m
1761516030	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	8 count/10m
1761514830	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	6 count/10m
1761513630	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	0 count/10m	8 count/10m
1761511229	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	8 count/10m
1761510029	0.01 Rx Erlang	0.01 Tx Erlang	12 count/10m	0 count/10m	6 count/10m
1761508836	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	5 count/10m
1761507630	0.01 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	8 count/10m
1761506429	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	8 count/10m
1761505229	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	0 count/10m	7 count/10m
1761504029	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	7 count/10m
1761502829	0.02 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	6 count/10m
1761500429	0.01 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	7 count/10m
1761499229	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	0 count/10m	8 count/10m
1761498029	0.03 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	9 count/10m
1761496829	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	0 count/10m	7 count/10m
1761495636	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	0 count/10m	9 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)