DK6MM-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DK6MM-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1780580963	966.2 hPa	23.5 C deg	41.9 %	1011.9 hPa	0 C deg
1780579150	966.3 hPa	23.4 C deg	42 %	1012 hPa	0 C deg
1780577330	966.4 hPa	23.3 C deg	42 %	1012.1 hPa	0 C deg
1780573701	966.9 hPa	23 C deg	42.4 %	1012.7 hPa	0 C deg
1780571894	966.9 hPa	23 C deg	42.5 %	1012.8 hPa	0 C deg
1780570067	966.8 hPa	22.8 C deg	42.7 %	1012.6 hPa	0 C deg
1780564630	967 hPa	22.4 C deg	42 %	1012.9 hPa	0 C deg
1780522209	970.3 hPa	24.6 C deg	40.7 %	1016 hPa	0 C deg
1780520377	970.4 hPa	24.8 C deg	40.6 %	1016.1 hPa	0 C deg
1780518581	970.5 hPa	25 C deg	40.4 %	1016.2 hPa	0 C deg
1780516753	970.6 hPa	25.2 C deg	40.4 %	1016.2 hPa	0 C deg
1780514939	970.5 hPa	25.2 C deg	40.3 %	1016.1 hPa	0 C deg
1780513124	970.3 hPa	25.3 C deg	40.3 %	1015.9 hPa	0 C deg
1780511313	970.3 hPa	25.4 C deg	40 %	1015.9 hPa	0 C deg
1780509505	970.2 hPa	25.4 C deg	39.9 %	1015.7 hPa	0 C deg
1780507678	970.1 hPa	25.5 C deg	39.8 %	1015.7 hPa	0 C deg
1780505862	970.1 hPa	25.6 C deg	39.6 %	1015.7 hPa	0 C deg
1780502232	970.1 hPa	25.6 C deg	40.1 %	1015.7 hPa	0 C deg
1780485766	970.3 hPa	25.5 C deg	39.1 %	1015.9 hPa	0 C deg
1780483948	970.3 hPa	25.3 C deg	39.4 %	1015.9 hPa	0 C deg
1780478505	970.4 hPa	23.6 C deg	42.8 %	1016.2 hPa	0 C deg
1780302280	976.3 hPa	24.4 C deg	41.5 %	1022.3 hPa	0 C deg
1780302029	976.3 hPa	24.4 C deg	41.2 %	1022.3 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)