VE3WGX-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE3WGX-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp1*	MagX*	MagY*	MagZ*
1765642524	11.4 VDC	19.5 DegC	-11 uT	-88.18 uT	-0.51 uT
1765640725	11.4 VDC	19.5 DegC	-10.82 uT	-87.91 uT	-0.71 uT
1765639824	11.4 VDC	19.5 DegC	-10.45 uT	-88.18 uT	-0.51 uT
1765638924	11.4 VDC	19 DegC	-10.73 uT	-88 uT	-0.51 uT
1765638025	11.4 VDC	19 DegC	-11.09 uT	-88.36 uT	-0.51 uT
1765637125	11.4 VDC	18.5 DegC	-10.64 uT	-88.45 uT	-0.51 uT
1765635325	11.4 VDC	18.5 DegC	-11 uT	-88.18 uT	-0.71 uT
1765634426	11.4 VDC	18.5 DegC	-10.73 uT	-88.36 uT	-0.61 uT
1765633526	11.4 VDC	18.5 DegC	-10.91 uT	-88.09 uT	-0.51 uT
1765631727	11.4 VDC	18.5 DegC	-10.55 uT	-88 uT	-0.41 uT
1765629027	11.4 VDC	18.5 DegC	-10.82 uT	-88.09 uT	-0.82 uT
1765628127	11.4 VDC	18.5 DegC	-11 uT	-88.36 uT	-0.31 uT
1765627228	11.4 VDC	18.5 DegC	-10.64 uT	-88.45 uT	-0.61 uT
1765626328	11.4 VDC	18 DegC	-10.73 uT	-88.27 uT	-0.51 uT
1765625428	11.4 VDC	18.5 DegC	-11.36 uT	-88.18 uT	-0.41 uT
1765624528	11.4 VDC	18.5 DegC	-10.73 uT	-88.27 uT	-0.41 uT
1765622729	11.4 VDC	18 DegC	-10.64 uT	-88.45 uT	-0.61 uT
1765620929	11.4 VDC	18.5 DegC	-10.82 uT	-88.36 uT	-0.31 uT
1765619130	11.4 VDC	18.5 DegC	-10.91 uT	-88.45 uT	-0.31 uT
1765618230	11.4 VDC	18.5 DegC	-11.18 uT	-88.45 uT	-0.92 uT
1765617331	11.4 VDC	18 DegC	-11.36 uT	-88.45 uT	-0.51 uT
1765615531	11.4 VDC	18 DegC	-10.27 uT	-88.45 uT	-0.31 uT
1765614631	11.4 VDC	18 DegC	-10.73 uT	-88.36 uT	-0.61 uT
1765612832	11.4 VDC	17.5 DegC	-10.73 uT	-88.45 uT	-0.51 uT
1765611931	11.4 VDC	17.5 DegC	-11.91 uT	-88.55 uT	-0.61 uT

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp1: 0, 0.5, -50

MagX: 0, 1, 0

MagY: 0, 1, 0

MagZ: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)