VK2AMW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2AMW-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	DgS1h*	Rx10m*	Dg10m*
1777590312	13.5 Volt	270 Pkt	22.75 Pcnt	38 Pkt	11 Pkt
1777590307	13.5 Volt	270 Pkt	22.75 Pcnt	38 Pkt	11 Pkt
1777586711	13.5 Volt	210 Pkt	24.44 Pcnt	44 Pkt	11 Pkt
1777586707	13.5 Volt	210 Pkt	24.44 Pcnt	44 Pkt	11 Pkt
1777583110	13.28 Volt	210 Pkt	31 Pcnt	37 Pkt	15 Pkt
1777583107	13.28 Volt	210 Pkt	31 Pcnt	37 Pkt	15 Pkt
1777579511	13.5 Volt	250 Pkt	26.46 Pcnt	31 Pkt	10 Pkt
1777579507	13.5 Volt	250 Pkt	26.46 Pcnt	31 Pkt	10 Pkt
1777575911	13.5 Volt	220 Pkt	21.24 Pcnt	39 Pkt	9 Pkt
1777575911	13.5 Volt	220 Pkt	21.24 Pcnt	39 Pkt	9 Pkt
1777572309	13.5 Volt	220 Pkt	22.37 Pcnt	42 Pkt	8 Pkt
1777572307	13.5 Volt	220 Pkt	22.37 Pcnt	42 Pkt	8 Pkt
1777568710	13.5 Volt	230 Pkt	22.07 Pcnt	40 Pkt	9 Pkt
1777568710	13.5 Volt	230 Pkt	22.07 Pcnt	40 Pkt	9 Pkt
1777565109	13.5 Volt	230 Pkt	20.74 Pcnt	36 Pkt	12 Pkt
1777565108	13.5 Volt	230 Pkt	20.74 Pcnt	36 Pkt	12 Pkt
1777561510	13.5 Volt	240 Pkt	18.32 Pcnt	47 Pkt	8 Pkt
1777561508	13.5 Volt	240 Pkt	18.32 Pcnt	47 Pkt	8 Pkt
1777557911	13.5 Volt	200 Pkt	22.7 Pcnt	27 Pkt	8 Pkt
1777557908	13.5 Volt	200 Pkt	22.7 Pcnt	27 Pkt	8 Pkt
1777554309	13.5 Volt	180 Pkt	26.94 Pcnt	21 Pkt	7 Pkt
1777554308	13.5 Volt	180 Pkt	26.94 Pcnt	21 Pkt	7 Pkt
1777550710	13.35 Volt	180 Pkt	24.63 Pcnt	27 Pkt	11 Pkt
1777550708	13.35 Volt	180 Pkt	24.63 Pcnt	27 Pkt	11 Pkt
1777547109	13.5 Volt	190 Pkt	26.74 Pcnt	33 Pkt	15 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

DgS1h: 0, 0.001, 0

Rx10m: 0, 1, 0

Dg10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)