DG0OPK-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG0OPK-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1762897969	963.2 hPa	15.5 C deg	1022 hPa	0 C deg
1762897969	963.2 hPa	15.5 C deg	1022 hPa	0 C deg
1762896160	963.3 hPa	15.9 C deg	1022.1 hPa	0 C deg
1762896159	963.3 hPa	15.9 C deg	1022.1 hPa	0 C deg
1762892557	963.3 hPa	16.2 C deg	1022 hPa	0 C deg
1762892532	963.3 hPa	16.2 C deg	1022 hPa	0 C deg
1762887087	963.2 hPa	16.6 C deg	1021.8 hPa	0 C deg
1762887087	963.2 hPa	16.6 C deg	1021.8 hPa	0 C deg
1762885282	963.3 hPa	16.6 C deg	1021.9 hPa	0 C deg
1762885282	963.3 hPa	16.6 C deg	1021.9 hPa	0 C deg
1762883465	963.3 hPa	17.5 C deg	1021.7 hPa	0 C deg
1762883465	963.3 hPa	17.5 C deg	1021.7 hPa	0 C deg
1762879830	963 hPa	18.8 C deg	1021.1 hPa	0 C deg
1762878021	962.9 hPa	19.5 C deg	1020.8 hPa	0 C deg
1762878021	962.9 hPa	19.5 C deg	1020.8 hPa	0 C deg
1762873453	962.5 hPa	19.7 C deg	1020.4 hPa	0 C deg
1762873447	962.5 hPa	19.7 C deg	1020.4 hPa	0 C deg
1762869828	962.2 hPa	19.9 C deg	1020 hPa	0 C deg
1762869828	962.2 hPa	19.9 C deg	1020 hPa	0 C deg
1762864372	962 hPa	20.1 C deg	1019.8 hPa	0 C deg
1762864371	962 hPa	20.1 C deg	1019.8 hPa	0 C deg
1762862558	962.1 hPa	19.8 C deg	1020 hPa	0 C deg
1762857123	962.2 hPa	18.5 C deg	1020.4 hPa	0 C deg
1762857123	962.2 hPa	18.5 C deg	1020.4 hPa	0 C deg
1762855301	962.4 hPa	17.9 C deg	1020.7 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)