TB5CPW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TB5CPW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1785304594	19 Pkt	3 Pkt	28 Pkt	-80 dBm	13.82 V
1785303964	28 Pkt	6 Pkt	34 Pkt	-79 dBm	13.82 V
1785303329	26 Pkt	5 Pkt	30 Pkt	-78 dBm	13.82 V
1785302695	20 Pkt	4 Pkt	23 Pkt	-78 dBm	13.82 V
1785302064	19 Pkt	2 Pkt	43 Pkt	-81 dBm	13.82 V
1785301436	24 Pkt	4 Pkt	32 Pkt	-80 dBm	13.82 V
1785300803	20 Pkt	4 Pkt	20 Pkt	-80 dBm	13.8 V
1785300172	18 Pkt	3 Pkt	33 Pkt	-80 dBm	13.82 V
1785299542	21 Pkt	3 Pkt	36 Pkt	-79 dBm	13.8 V
1785298910	25 Pkt	4 Pkt	29 Pkt	-81 dBm	13.82 V
1785298277	25 Pkt	3 Pkt	36 Pkt	-79 dBm	13.82 V
1785297643	24 Pkt	3 Pkt	32 Pkt	-81 dBm	13.82 V
1785297011	27 Pkt	4 Pkt	31 Pkt	-80 dBm	13.82 V
1785296379	21 Pkt	4 Pkt	39 Pkt	-80 dBm	13.82 V
1785295746	31 Pkt	3 Pkt	42 Pkt	-79 dBm	13.72 V
1785295112	53 Pkt	3 Pkt	42 Pkt	-78 dBm	13.82 V
1785294480	7 Pkt	0 Pkt	7 Pkt	-81 dBm	13.82 V
1785293666	30 Pkt	4 Pkt	29 Pkt	-78 dBm	13.8 V
1785293031	21 Pkt	3 Pkt	25 Pkt	-78 dBm	13.8 V
1785292401	24 Pkt	3 Pkt	25 Pkt	-78 dBm	13.8 V
1785291770	26 Pkt	4 Pkt	15 Pkt	-78 dBm	13.8 V
1785291139	21 Pkt	2 Pkt	47 Pkt	-81 dBm	13.8 V
1785290508	29 Pkt	3 Pkt	23 Pkt	-81 dBm	13.8 V
1785289879	17 Pkt	4 Pkt	43 Pkt	-81 dBm	13.8 V
1785289249	27 Pkt	3 Pkt	39 Pkt	-81 dBm	13.8 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)