N6PAZ-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N6PAZ-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	Temp*
1777266054	20 Pkts	11 C
1777265454	20 Pkts	10 C
1777264854	22 Pkts	10 C
1777264254	23 Pkts	10 C
1777263655	16 Pkts	10 C
1777263054	25 Pkts	10 C
1777262454	20 Pkts	10 C
1777261854	23 Pkts	10 C
1777261254	22 Pkts	10 C
1777260654	27 Pkts	10 C
1777260054	30 Pkts	10 C
1777259454	21 Pkts	11 C
1777258854	32 Pkts	11 C
1777258254	29 Pkts	11 C
1777257654	27 Pkts	11 C
1777257055	29 Pkts	11 C
1777256454	31 Pkts	11 C
1777255854	39 Pkts	12 C
1777255709	49 Pkts	14 C
1777255708	25 Pkts	12 C
1777255254	32 Pkts	12 C
1777254654	49 Pkts	14 C
1777254054	35 Pkts	12 C
1777253454	33 Pkts	13 C
1777252851	33 Pkts	13 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

Temp: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)