Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object HP1GRE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RxTraffic* TxTraffic* RxDrop* RSSI* Voltage*
1765662630 36 Pkt 0 Pkt 0 Pkt -33 dBm 13.84 V
1765661277 49 Pkt 0 Pkt 0 Pkt -33 dBm 13.84 V
1765659920 25 Pkt 0 Pkt 0 Pkt -33 dBm 13.84 V
1765658566 19 Pkt 0 Pkt 0 Pkt -33 dBm 13.84 V
1765657214 19 Pkt 0 Pkt 0 Pkt -32 dBm 13.84 V
1765655862 21 Pkt 0 Pkt 0 Pkt -33 dBm 13.84 V
1765654510 19 Pkt 0 Pkt 0 Pkt -33 dBm 13.84 V
1765653157 18 Pkt 0 Pkt 0 Pkt -34 dBm 13.84 V
1765651805 28 Pkt 0 Pkt 0 Pkt -33 dBm 13.84 V
1765650450 49 Pkt 0 Pkt 0 Pkt -33 dBm 13.84 V
1765649094 36 Pkt 0 Pkt 0 Pkt -34 dBm 13.84 V
1765647739 21 Pkt 0 Pkt 0 Pkt -34 dBm 13.84 V
1765645035 20 Pkt 0 Pkt 0 Pkt -33 dBm 13.84 V
1765643683 19 Pkt 0 Pkt 0 Pkt -33 dBm 13.84 V
1765642332 19 Pkt 0 Pkt 0 Pkt -34 dBm 13.84 V
1765640979 16 Pkt 0 Pkt 0 Pkt 31 dBm 13.84 V
1765639628 30 Pkt 0 Pkt 0 Pkt -34 dBm 13.84 V
1765638275 27 Pkt 0 Pkt 0 Pkt -34 dBm 13.84 V
1765636923 30 Pkt 0 Pkt 0 Pkt -33 dBm 13.84 V
1765635569 16 Pkt 0 Pkt 0 Pkt -34 dBm 13.84 V
1765634216 26 Pkt 0 Pkt 0 Pkt -32 dBm 13.84 V
1765632864 23 Pkt 0 Pkt 0 Pkt -31 dBm 13.84 V
1765631512 18 Pkt 0 Pkt 0 Pkt -32 dBm 13.84 V
1765630161 18 Pkt 0 Pkt 0 Pkt -34 dBm 13.84 V
1765628811 17 Pkt 0 Pkt 0 Pkt -32 dBm 13.84 V
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)