DC2RS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DC2RS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1789963269	979.4 hPa	26.4 C deg	1034.9 hPa	0 C deg
1789961454	979.7 hPa	26.5 C deg	1035.2 hPa	0 C deg
1789959639	979.5 hPa	26.6 C deg	1035 hPa	0 C deg
1789957824	979.5 hPa	26.6 C deg	1035 hPa	0 C deg
1789956006	979.6 hPa	26.6 C deg	1035.1 hPa	0 C deg
1789954191	979.6 hPa	26.6 C deg	1035.2 hPa	0 C deg
1789952376	979.8 hPa	26.6 C deg	1035.3 hPa	0 C deg
1789950561	979.5 hPa	26.7 C deg	1035.1 hPa	0 C deg
1789948743	979.5 hPa	26.5 C deg	1035 hPa	0 C deg
1789946928	979.4 hPa	26.7 C deg	1034.9 hPa	0 C deg
1789945112	979.1 hPa	26.7 C deg	1034.6 hPa	0 C deg
1789943297	979.1 hPa	26.7 C deg	1034.6 hPa	0 C deg
1789941479	978.9 hPa	26.6 C deg	1034.4 hPa	0 C deg
1789939664	978.8 hPa	26.7 C deg	1034.3 hPa	0 C deg
1789937849	978.3 hPa	26.8 C deg	1033.7 hPa	0 C deg
1789936043	978.1 hPa	26.7 C deg	1033.5 hPa	0 C deg
1789934215	977.7 hPa	26.6 C deg	1033.2 hPa	0 C deg
1789932400	977.4 hPa	26.6 C deg	1032.8 hPa	0 C deg
1789930585	976.8 hPa	26.5 C deg	1032.2 hPa	0 C deg
1789928770	976.5 hPa	26.3 C deg	1031.9 hPa	0 C deg
1789926955	975.2 hPa	26.4 C deg	1030.6 hPa	0 C deg
1789925140	974.8 hPa	26.4 C deg	1030.1 hPa	0 C deg
1789923325	974.6 hPa	26.3 C deg	1029.9 hPa	0 C deg
1789921513	974.6 hPa	26.2 C deg	1029.9 hPa	0 C deg
1789919698	974 hPa	26.2 C deg	1029.3 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)