YM4KMU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM4KMU. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1772777555	23 Pkt	31 dBm	12.9 V
1772776628	26 Pkt	31 dBm	12.84 V
1772775700	23 Pkt	31 dBm	12.71 V
1772774773	18 Pkt	31 dBm	12.71 V
1772773844	24 Pkt	31 dBm	12.69 V
1772771989	20 Pkt	31 dBm	12.76 V
1772771062	20 Pkt	31 dBm	12.71 V
1772770139	26 Pkt	31 dBm	12.71 V
1772768279	10 Pkt	31 dBm	12.69 V
1772767353	15 Pkt	31 dBm	12.76 V
1772766425	14 Pkt	31 dBm	12.71 V
1772765498	21 Pkt	31 dBm	12.71 V
1772764570	16 Pkt	31 dBm	12.71 V
1772763643	21 Pkt	31 dBm	12.74 V
1772762716	16 Pkt	31 dBm	12.76 V
1772761789	14 Pkt	31 dBm	12.76 V
1772760863	17 Pkt	31 dBm	12.76 V
1772759934	26 Pkt	31 dBm	12.8 V
1772759006	22 Pkt	31 dBm	12.76 V
1772758080	21 Pkt	31 dBm	12.8 V
1772757153	22 Pkt	31 dBm	12.8 V
1772756225	18 Pkt	31 dBm	12.8 V
1772755297	18 Pkt	31 dBm	12.8 V
1772753443	22 Pkt	31 dBm	12.8 V
1772752515	16 Pkt	31 dBm	12.82 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)